六自由度平台产品简介

----------------------------------------------------------------------

HXP200S-MECA高负载六轴六脚架是一种六自由度并联运动设备，具有六个自由度：X，Y，Z，俯仰，横滚和偏航。 HXP200S是HXP200的一种更宽，更坚固的版本，能够承受85千克，至少11千克的中心载荷和偏移载荷。 HXP200S还具有较长的行程范围（最大±59毫米），快速的速度（最大81毫米/秒），高的刚度和稳定性。

HXP200S由六个提供精确MIM（0.15μm）的直流伺服电动机致动器驱动。致动器上的制动器消除了断电条件下的漂移。增强整体运动性能的关键设计特征是将执行器连接到底座和活动顶板上的接头。

预紧且无间隙的万向节不仅增强了HXP200S的可重复性和定位性能，而且是其位置稳定性和刚度的关键。通过使用纽波特的免费HexaViz仿真软件，确定HXP200S-MECA是否适合您的应用。

The HXP200S-MECA High Load 6-Axis Hexapod is a parallel kinematic motion device that provides six degrees of freedom: X, Y, Z, pitch, roll, and yaw. The HXP200S is a wider and stiffer version of the HXP200, capable of handling 85 kg, centered and offset loads of at least 11 kg. The HXP200S also features long travel ranges (up to ±59 mm), fast speeds (up to 81 mm/s), high stiffness and stability.

The HXP200S is driven by six DC servo motor actuators which provide precise MIM (0.15μm).. A brake on the actuator eliminates drift at power-off conditions. A critical design feature that enhances the overall motion performance is the joints with which the actuators are attached to the base and the moving top plate. The preloaded and backlash-free, cardan joints enhance not only the repeatability and positioning performance of the HXP200S, but are also key to its position stability and stiffness.

Determine if the HXP200S-MECA is the right hexapod for your application by using Newport's free HexaViz Simulation Software.

HXP200S-MECA六自由度尺寸图

HXP200S-MECA精密六自由度平台技术参数

六自由度精密定位平台应用

光学器件和卫星装配与测试

AED 模拟

天文

生物技术和外科手术

X 射线衍射

微加工和显微操纵